COMPRO IP540 Uživatelský manuál stáhnout pdf (Strana 72)

9-6 DDNS CongurationTrouble with Remote Viewing on Browser

Compro IP540(P) / IP570(P)

Figure 9-10. Port forwarding

Having taken the above steps, you should be able to log in to the IP camera from a remote location by

entering the DDNS address or the static IP address in the location eld of a web browser (depending on your

conguration). For example, in this case, you should enter "http://61.220.20.16:80" into the location eld of

Internet Explorer to access the IP camera.

Important:

• IfyouhavemultipleIPcamerasinstalledonanetwork,youwillneed

to change the HTTP and RTSP port on them manually so each one of

them will use a dierent port. E.g. changing the HTTP and RTSP port

for the 2nd device to 81 and 555 respectively and accessing the 2nd

device by logging on to http://61.220.20.16:81.

• Whenconfiguringportforwarding/mappingonyourrouter,note

that the public RTSP port must be qual to the internal RTSP port used

by the IP camera. For instance, if the IP camera uses RTSP port 554

internally, then its mapped public RTSP port on the router should be

554 too. Though the same does no apply to the camera's HTTP port.

The camera using HTTP port 80 can have 8080 as its mapped public

HTTP port on the router.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 89 90

Žádné komentáře

COMPRO IP540 Uživatelský manuál Strana 72